Also, on some displays, the SET button may be represented as a “Gear” icon. NOTE: If you do not hear a beep when holding down these two buttons, your display likely does not support WPS and this process will unfortunately not work to help get you connected. You should hear a beep and the display will enter WPS mode, allowing it to connect to your router automatically. On your La Crosse Technology display, press and hold down both the SET and MINUS (-) buttons together for about 5 seconds.Once WPS is activated on your router, you will typically have about 2 minutes to complete the next step. Please consult your router’s manual for specific instructions as these can vary by model. This can be done using a dedicated WPS button on the router itself and/or through your router’s app or browser-based admin panel. (NOTE: WPS is not supported by Google Mesh Routers.)

WPS Option: Try connecting via WPS if your router has a WPS button. Try Another Device: If you have an alternate device to use that is an Apple device or an Android device with an OS version prior to OS 12 you can complete the initial set-up using that device. One symptom of this is receiving a 'Couldn't get IP Address' or 'No IP Address Found' message when the device attempts to connect. Because of the Wi-Fi connection settings native with Android OS12 if you are experiencing issues connecting to Wi-Fi with the in-app steps, you may need to use one of the alternate connection options below to complete the initial setup of your station.

How to connect to wps on android 4.4.